Tuesday, June 28, 2016

Understanding The Fire Alarm System In Your Building


The next time you step into your building, I want you to step to the side and take a few seconds to look up at your ceiling, and next to the doors. Take note of the smoke detectors, pull stations, and the red panel that is behind the receptionists desk. Then walk down the hallway and continue scanning for anything on the ceiling that looks like a strobe, horn strobe, and more pull stations at the exits. Finally walk to your electrical room or sprinkler room and you will likely find your Fire Alarm Control Panel (FACP).

When you take the key and open the panel you will find the installation date, inspection date, and any repairs that have been performed; notated and placed on the inside of the door. This is a great place to begin your search for who to call if your system is malfunctioning. The installation companies name will be on the top of the installation sticker. They likely have an inspection and service division that can repair your system.

Now that you have opened your panel, you should take note of a few things immediately. First, does the panel show system normal or something to that end? Second, does the panel have a sticker in it showing that it has received its annual inspection this year? Third, take note of the two batteries at the base of the FACP; these batteries should have the month and year of their installation written on them so that you will know when they should be replaced.

HERE ARE SOME COMMON FAULTS AND WHAT THEY MEAN

1. GROUND FAULT - This means that an electrical component is making contact with something that it should not making contact with.

2. LOW BATTERY - This means that your batteries are low, and likely need to be replaced.

3. DIGITAL ALARM COMMUNICATOR TRANSMITTER (DACT) FAULT - These have the ability to dial out or send a digitized message to a central station who will relay the message to a fire station or notify designated personnel in regard to a trouble in your system. This being a trouble means that your fire alarm system is not communicating properly.

4. PANEL BEEPING AND YOU DON'T CARE WHY!!! - This is where prior planning comes in very handy. Call your fire alarm inspection and service company, have them send a technician to your building as soon as possible, they will fix the system for you.

Your fire alarm system has inputs and outputs. Smoke detectors, heat detectors, and beam detectors are common inputs. Strobes and horn strobes are common outputs. When an input detects something that will put it into alarm, such as fire, smoke, or heat, a signal is sent to the FACP. This signal will then be used to send the notification devices into alarm. Meanwhile, if your system is going into alarm, your DACT will be dialing out to the monitoring station who will then notify the appropriate personnel.

If you want specific information about your fire alarm system you can usually download the user manual after looking at your FACP to find out what type of system you have. You can also request owner training from your fire alarm service company.



Article Source: http://EzineArticles.com/9337116

Saturday, June 25, 2016

The Key Advantages of Installing a Nurse Call System


A nurse call system, also known as a ""call bell" system, is the most important means of communication between patients and nurses. Originally, these systems have been created for one single way to call a nurse, by pushing a button that generated a call light and, after that, a tone at the nurse's desk.

But today, nurse call systems technology has evolved from the days of light and tone, simplified systems to integrated platforms featuring voice communication. Now, these systems are the primary component of a healthcare communication platform.

They also incorporate some other technological innovations from other industries into a patient-to-nurse communication system. With the help of such healthcare solutions, today there is a great possibility to enhance personnel productivity and patient satisfaction.

Before a hospital or a healthcare facility decides to purchase an Intercall nurse call system for example, there are some factors to consider. One of the most important questions you should answer is what mode you need and why you think it will work.

A typical nurse call mode is where someone at the unit level answers the calls from that unit, and this might work. But, today many medical facilities prefer the new way of operation for nurse call, which reduces labor costs, enables staff to communicate with patients faster, and improves the patient experience. Here is where centralized nurse call comes into play. Here are the key benefits:

Patients receive personal response from the operators working with the system within the shortest period of time possible (usually 5-6 seconds);

The system identifies the busiest times of day for patient requests;

The system identifies the top ten patient requests for certain nursing units on a monthly basis;

Etc.

It is very important for a patient to know that his/her requests are being answered instantly. For caregivers, fast and efficient responses to patient requests mean much better patient care. Also, it has been discovered the system's reporting abilities offer necessary details that help continuously improve the patient experience.

The use of these powerful systems goes far beyond the typical ringing medical staff for help, or simple voice communication between the nurse and the patient.

Nowadays, these systems are both voice and information platforms that help staff offer faster and much more efficient care to patients.

Care professionals must consider installing a nurse call system in order to gain customer satisfaction and enter the list of top caregivers.



Article Source: http://EzineArticles.com/8835164

Wednesday, June 22, 2016

Shop Alarms - Why Your Business Should Have One


Why should you consider having shop alarms for your store? Why is it important that you install some of these safety devices in your shop? These alarms are important for your store simply because they are made to protect both you and your investment. Imagine putting up a business with all the money you have saved in your life and having this investment go down the drain due to thieves or due to fire.

Buying and installing shop alarms is important since you will need to keep things safe even when you are not looking or when you are not around. Businesses that do not use anti theft alarms usually end up being the target of thieves and shoplifters. This means that they are often open to the possibility of loss of revenue every day. Anti theft alarms stop shoplifters from leaving the store with your merchandise since an alarm sounds once an item is taken out of the store without being paid for. This kind of an alarm helps you keep an eye on your merchandise even when you are busy tending to other customers.

Fire alarms and smoke detectors are also important shop alarms to have. Thieves and shoplifters are not the only threat to your business. Fire is too. Getting a good fire alarm system for your shop will help alert you of the possibility of a fire that may damage your goods or your store. This kind of an early warning device will help save you a lot of money by letting you know of the possibility of a fire before it gets too big to control and put out.



Article Source: http://EzineArticles.com/2694375

Sunday, June 19, 2016

Bart van Leeuwen Talks 'Smart Data For Smarter Fire Protection'



Bart van Leeuwen, a senior firefighter from Amsterdam, was the featured speaker at the 2016 NFPA Conference & Expo in Las Vegas. He spoke about his quest to leverage big data so that firefighters and community members are as safe as possible from fire. He said it it entails more than simply putting lots of data in a firefighter’s hand. Data has to apply to real world circumstances, offer real world solutions – and work in real time.

Monday, June 13, 2016

What Type of Fire Alarm Do I Need and Where Should I Put It?



It is probably quite evident that there are a number of fire alarms available, and at vastly varying prices, so it may be very difficult to understand the differences between Optical, Ionisation and Heat alarms. This guide is aimed at taking some of that confusion away.

So what is the difference between the models?

As stated above there are three types of alarm, each with its own uses.

Optical Alarm: This type of smoke alarm usually uses an infrared beam between two points, the alarm being triggered should the beam be disturbed. In much the same way as a criminal might trip an alarm when breaking into a bank vault or museum in the movies, if the beam is broken, the alarm will go off. It detects larger smoke particles best.

Ionisation Alarm: These alarms use 2 small plates (one charged positively, one negatively) and an alpha particle source to create a constant current running across the gap between the plates. When smoke enters the chamber it interferes with this process, interrupting the charge. When the charge drops, the alarm goes off. These alarms are best at detecting smaller smoke particles.

Heat Alarms: A heat alarm will trigger if the room temperature reaches a certain level. They do not detect smoke, and are not to be used as a substitute for a smoke alarm, but should be used in assisting these alarms for greater fire detection.

Why do we need different types of fire alarm?

Different types of alarm exist due to the different types of fire. Believe it or not, fires act in different ways depending on what is burning, and is important to identify the fire as quickly as possible. Different alarms are better at discovering different fires, and choosing the right alarm for the right room could save your life one day.

Fires can be particularly smokey, often caused by the burning of papers or clothing etc, and burn rapidly, producing smaller smoke particles. The Ionisation alarms are better at detecting these fires.

Other fires can be a lot less smokey, often being harder to detect, and are caused by the burning of carpets, sofas or electrical devices. These fires tend to burn less rapidly, producing larger smoke particles. Optical alarms will be better at detecting these fires.

Which fire alarm do I need?

This article is meant as a general guide, and for more detailed safety advice it is highly recommended that you contact your local Fire Service. This being said, the information below should help you decide.

Optical alarm: Living room, dining room, hallway
Ionisation alarm: Bedrooms, walk in wardrobes
Heat alarms: Dusty areas such as garages, unconverted lofts etc where the dust could interfere with the other alarm types.
Alarms are available as either battery operated, or mains operated with battery backup. The mains alarms will continue to work for a time after power is lost to the unit, but only as a backup. If this is the case, mains should be restored to the unit right away, or the battery changed.

Some alarms even come with the option of interconnectivity, meaning if one alarm sounds, then all the alarms sound. This is highly useful in larger properties where one alarm may not be heard by everyone. The idea is to raise the alarm to everybody right away - as soon as a fire starts - and having the alarms linked together will achieve this.

Fires are responsible for a large number of deaths each year, as we all know from the adverts broadcast on television or radio. This is a fact, and can be greatly reduced by just checking your alarm to be sure that it works, and that it is the correct alarm for the location it is placed. Be aware that alarms need replacing after a certain amount of time, and it is worth checking on the unit and to note the replace by date. If you are unsure, check with your local Fire Service.



Article Source: http://EzineArticles.com/7649945

Friday, June 10, 2016

A Home Alarm System Is A Wise Decision For Many Reasons


If you live in today's world, you know just how easy it is for intruders to get into your home and invade your privacy especially if you have no home alarms or other security measures installed. As technology improves to better the quality of life, there is also the converse which means that people with ill intentions also find ways to cause more harm to unsuspecting parties. This is why it is never a bad idea to have a good alarm system of high quality especially at your residence to protect you and your family if any. It can save you from incurring both loss of property and life.

Reasons for having an alarm system installed

An alarm system can simply not be a bad idea. It is one of those investments that present you with a win-win situation. If you purchase a home alarm security system and your house never gets invaded by burglars or thieves, just as well because at least you took precaution. In the event that you actually get attacked by thieves then you will be ready and waiting for them together with back up form the security company.

A second very important reason for having an alarm system installed is because some of the alarms, depending on their setup, do not only go off when an intruder approaches but also in case they sense unnatural motion or changes in the temperature of your house and its environs. Some double up as fire alarms. Installing such a unit means therefore that your house and the residents will be protected both form intruders and fire accidents. Intruders may also set fire to your house with an intention of causing harm and these alarms can come in useful.

Thirdly, alarm systems are inexpensive and last for a good length of time with the proper maintenance. You will not need to incur hidden costs monthly in maintenance like you would with other appliances you may have in your home. As long as a home alarm system is set right, it will function perfectly requiring only the occasional check up from the alarm company to ensure it has not been tampered with.

Home alarm security systems are money savers. If you ever need to move to another estate or place of residence you can just have the alarm company re-install it in your new home. You do not need to buy a new one when moving.



Article Source: http://EzineArticles.com/6959937

Tuesday, June 7, 2016

Light & Building 2016 Legrand Guided Tour



Legrand Group at Light & Building 2016.
The world’s leading trade fair for lighting and building services technology

Saturday, June 4, 2016

Sparky the Fire Dog® Shows How To Find Out The Age Of A Smoke Alarm



In support of this year’s Fire Prevention Week campaign, “Don’t Wait – Check the Date! Replace Smoke Alarms Every 10 Years”, Sparky the Fire Dog® reminds everyone that smoke alarms don’t last forever and need to be replaced every 10 years. He also shows how to find out the age of a smoke alarm.

To learn more about the 2016 Fire Prevention Week visit http://www.firepreventionweek.org

Wednesday, June 1, 2016

Matt Klaus Says Home Fire Sprinklers Can Blend With Your Home's Decor



NFPA sprinkler expert Matt Klaus tells a story about friends who were concerned that their fire sprinklers would ruin the look of their new home. Read more about home fire sprinklers: Fire Sprinkler Initiative http://www.firesprinklerinitiative.org